|
Linear Scale
Total Length 20mm in 200 divisions, least count-0.1mm |
 |
|
Thread Size (mm)
9 Metric Screw Threads per mm :
-0.25, 0.3, 0.35, 0.4, 0.45, 0.6, 0.75, 0.9 & 1mm |
 |
|
Thread Size (Inches)
9 Screw Threads shown in inches TPI :
-8,14,16,18,20,24,28 & 32 and 50. |
 |
|
Counting Grid
10mm square divided into 0.5mm square
10mm scale in 100 parts
13 circles 0.1 to 0.25mm. |
 |
|
Radius Scale
10mm radius scale numbered every mm, graduated each 0.5mm-180
degress protractor numbered every 10-degrees each division. |
 |
|
Multi Guage
0.3" X 0.4" grid in 0.025" squares/Two horizontal
scales 0.4" with 0.005" divisions, 20mm with 1/1mm
divisions. Angle scale 0-degress to 90-degrees in 1-degree divisions.
Radius scale 1 to 10mm. Nine circles 1/1mm to 3mm dia. |
|
|
Multi Scale
3 Horizontal scales : 20mm 1st scale 10-0-10 in 0.1mm division
and 0-1 in 0.05mm, 2nd scale is 0-1/8" in 1/64". 90-degrees
anle scale in 5-degrees division, 80-90-degrees in 0.1 degree.
Arcs 0-10mm in 0.5mm, 0-1 in 0.1mm div. Angle scales 29, 55,
60 and 118-degrees. Left 10 circles 0.1 to 0.1mm div, right 10
circles from 0.005 to 1/64" dia. |
 |
|
Counting Grid
43mm dia-Angle scale reads 0-90 degrees, graduated every degree,
numbered every 5-degrees. Radius scale: reads 1/16"
to 3/3 numbered 1/32". Millimeter scale: 10mm, graduated
every 1/10, numbered every mm. Inch scale: 1/2" long,
graduated every 0.005", numbered every 0.01". Circle
scales: 4 scales 1/64",1/32" 3/64", 1/16",
5circles 0.01" to 0.05". Width scales: 7 sizes
1/64" to 1/14". |
 |
|
